Stainless steel distance sleeves

A preselection can be made using the selection fields above.

The result is displayed below (several products can also be displayed).

Please click on the respective sleeve (image) to access the article.

Select the desired length and package contents in the article.

Stainless steel distance sleeves, spacer tubes, tube sleeves

In this category we have summarized all stainless steel sleeves that are available immediately.

When we selected the stainless steel tube, we made sure that you can insert common screw sizes easily / flexibly (the sleeves have no internal thread).

The article name gives you an indication which screw you can push through. Example: with the article "Stainless steel sleeves 5x3,4x0,8 mm (up to M3*)" you can push a M3 screw through, M4 or larger cannot be pushed through accordingly.

In the table* below you can see the dimensions for outside and inside diameters as well as the wall thickness. The available lengths for each article vary - the table should give you a quick overview of the available sizes.

* for a larger view just click on the table, a new tab will open

Stainless steel sleeves 5x3,4x0,8 mm (up to M3*)

Package contents: 10 sleeves | Length: 30 mm

With metallgo sleeves, spacer sleeves - without internal thread - made of stainless steel, you will get high-quality sleeves, both functional but also optical. Exact length cut Exact inside diameter | A M3 screw will not get stuck in the sleeve but will keep movable Straight cutting surface - without burr, without chamfer Corrosion and weather resistant Good-looking surface finish Material: High quality stainless steel tube welded (with so-called scraped / smoothed inner seam), 1.4571-N (V4A)

Variants from €4.90*

€9.40*

Go to variants

Stainless steel sleeves 6x4,4x0,8 mm (up to M4*)

Package contents: 40 sleeves | Length: 6 mm

With metallgo sleeves, spacer sleeves - without internal thread - made of stainless steel, you will get high-quality sleeves, both functional but also optical. Exact length cut Exact inside diameter | A M4 screw will not get stuck in the sleeve but will keep movable Straight cutting surface - without burr, without chamfer Corrosion and weather resistant Good-looking surface finish Material: High quality stainless steel tube welded (with so-called scraped / smoothed inner seam), 1.4571-N (V4A)

Content: 40 piece(s) (€3.78* / 10 piece(s))

Variants from €5.00*

€15.10*

Go to variants

Stainless steel sleeves 7x5,4x0,8 mm (up to M5*)

Package contents: 100 sleeves | Length: 20 mm

With metallgo sleeves, spacer sleeves - without internal thread - made of stainless steel, you will get high-quality sleeves, both functional but also optical. Exact length cut Exact inside diameter | A M5 screw will not get stuck in the sleeve but will keep movable Straight cutting surface - without burr, without chamfer Corrosion and weather resistant Good-looking surface finish Material: High quality stainless steel tube welded (with so-called scraped / smoothed inner seam), 1.4571-N (V4A)

Content: 100 piece(s) (€4.15* / 10 piece(s))

Variants from €5.80*

€41.50*

Go to variants

Stainless steel sleeves 8x6x1 mm (up to M6*)

Package contents: 10 sleeves | Length: 10 mm

With metallgo sleeves, spacer sleeves - without internal thread - made of stainless steel, you will get high-quality sleeves, both functional but also optical. Exact length cut Exact inside diameter | A M6 screw will not get stuck in the sleeve but will keep movable Straight cutting surface - without burr, without chamfer Corrosion and weather resistant Good-looking surface finish Material: High quality stainless steel tube welded (with so-called scraped / smoothed inner seam), 1.4301 (V2A)

Variants from €5.80*

€8.60*

Go to variants

Stainless steel sleeves 8x6,4x0,8 mm (up to M6*)

Package contents: 20 sleeves | Length: 35 mm

With metallgo sleeves, spacer sleeves - without internal thread - made of stainless steel, you will get high-quality sleeves, both functional but also optical. Exact length cut Exact inside diameter | A M6 screw will not get stuck in the sleeve but will keep movable Straight cutting surface - without burr, without chamfer Corrosion and weather resistant Good-looking surface finish Material: High quality stainless steel tube welded (with so-called scraped / smoothed inner seam), 1.4301 (V2A)

Content: 20 piece(s) (€9.05* / 10 piece(s))

Variants from €5.60*

€18.10*

Go to variants

Stainless steel sleeves 9x6,6x1,2 mm (up to M6*)

Package contents: 5 sleeves | Length: 25 mm

With metallgo sleeves, spacer sleeves - without internal thread - made of stainless steel, you will get high-quality sleeves, both functional but also optical. Exact length cut Exact inside diameter | A M6 screw will not get stuck in the sleeve but will keep movable Straight cutting surface - without burr, without chamfer Corrosion and weather resistant Good-looking surface finish Material: High quality stainless steel tube welded (with so-called scraped / smoothed inner seam), 1.4301 (V2A)

Content: 5 piece(s) (€1.84* / 1 piece(s))

Variants from €7.10*

€9.20*

Go to variants

Stainless steel sleeves 10x7x1,5 mm (up to M6*)

Package contents: 30 sleeves | Length: 15 mm

With metallgo sleeves, spacer sleeves - without internal thread - made of stainless steel, you will get high-quality sleeves, both functional but also optical. Exact length cut Exact inside diameter | A M6 screw will not get stuck in the sleeve but will keep movable Straight cutting surface - without burr, without chamfer Corrosion and weather resistant Good-looking surface finish Material: High quality stainless steel tube welded (with so-called scraped / smoothed inner seam), 1.4301 (V2A)

Content: 30 piece(s) (€6.97* / 10 piece(s))

Variants from €4.20*

€20.90*

Go to variants

Stainless steel sleeves 10x8,4x0,8 mm (up to M8*)

Package contents: 40 sleeves | Length: 10 mm

With metallgo sleeves, spacer sleeves - without internal thread - made of stainless steel, you will get high-quality sleeves, both functional but also optical. Exact length cut Exact inside diameter | A M8 screw will not get stuck in the sleeve but will keep movable Straight cutting surface - without burr, without chamfer Corrosion and weather resistant Good-looking surface finish Material: High quality stainless steel tube welded (with so-called scraped / smoothed inner seam), 1.4301 (V2A)

Content: 40 piece(s) (€6.18* / 10 piece(s))

Variants from €5.80*

€24.70*

Go to variants

Stainless steel sleeves 11x9x1 mm (up to M8*)

Package contents: 2 sleeves | Length: 15 mm

With metallgo sleeves, spacer sleeves - without internal thread - made of stainless steel, you will get high-quality sleeves, both functional but also optical. Exact length cut Exact inside diameter | A M8 screw will not get stuck in the sleeve but will keep movable Straight cutting surface - without burr, without chamfer Corrosion and weather resistant Good-looking surface finish Material: High quality stainless steel tube welded (with so-called scraped / smoothed inner seam), 1.4301 (V2A)

Content: 2 piece(s) (€4.05* / 1 piece(s))

Variants from €8.00*

€8.10*

Go to variants

Stainless steel sleeves 12x9x1,5 mm (up to M8*)

Package contents: 40 sleeves | Length: 90 mm

With metallgo sleeves, spacer sleeves - without internal thread - made of stainless steel, you will get high-quality sleeves, both functional but also optical. Exact length cut Exact inside diameter | A M8 screw will not get stuck in the sleeve but will keep movable Straight cutting surface - without burr, without chamfer Corrosion and weather resistant Good-looking surface finish Material: High quality stainless steel tube welded (with so-called scraped / smoothed inner seam), 1.4301 (V2A)

Content: 40 piece(s) (€16.70* / 10 piece(s))

Variants from €5.80*

€66.80*

Go to variants

Tip

Stainless steel sleeves 13x11x1 mm (up to M10*)

Package contents: 50 sleeves | Length: 35 mm

With metallgo sleeves, spacer sleeves - without internal thread - made of stainless steel, you will get high-quality sleeves, both functional but also optical. Exact length cut Exact inside diameter | A M10 screw will not get stuck in the sleeve but will keep movable Straight cutting surface - without burr, without chamfer Corrosion and weather resistant Good-looking surface finish Material: High quality stainless steel tube welded (with so-called scraped / smoothed inner seam), 1.4301 (V2A)

Content: 50 piece(s) (€9.18* / 10 piece(s))

Variants from €4.70*

€45.90*

Go to variants

Only 1 available

Stainless steel sleeves 15x11x2 mm (up to M10*)

Package contents: 400 sleeves | Length: 15 mm

With metallgo sleeves, spacer sleeves - without internal thread - made of stainless steel, you will get high-quality sleeves, both functional but also optical. Exact length cut Exact inside diameter | A M10 screw will not get stuck in the sleeve but will keep movable Straight cutting surface - without burr, without chamfer Corrosion and weather resistant Good-looking surface finish Material: High quality stainless steel tube welded (with so-called scraped / smoothed inner seam), 1.4301 (V2A)

Content: 400 piece(s) (€6.85* / 10 piece(s))

Variants from €6.70*

€273.90*

Go to variants

Stainless steel sleeves 16x13x1,5 mm (up to M12*)

Package contents: 50 sleeves | Length: 10 mm

With metallgo sleeves, spacer sleeves - without internal thread - made of stainless steel, you will get high-quality sleeves, both functional but also optical. Exact length cut Exact inside diameter | A M12 screw will not get stuck in the sleeve but will keep movable Straight cutting surface - without burr, without chamfer Corrosion and weather resistant Good-looking surface finish Material: High quality stainless steel tube welded (with so-called scraped / smoothed inner seam), 1.4301 (V2A)

Content: 50 piece(s) (€6.90* / 10 piece(s))

Variants from €6.20*

€34.50*

Go to variants